U-CUP ROD METRIC

DESCRIPTION

The MUA-R is a metric asymmetrical single-acting pneumatic rod seal. This seal is available in a wide range of rod diameters, but specifically meets the requirements for seals with the smallest possible housings. For these small seals, although cross-sections and heights are very small, the sealing performance is excellent. 

The MUA-R is an extremely low friction seal because of the short contact of the sealing surface area. Back-up rings or brackets are not required because of the special design. 

The MUA-R is composed of nitrile making it resistant to water and most oils while maintaining good low-pressure sealing. 

SEAL INFORMATION

Durometer (Shore A): 80 

Temperature Range (F): -22 TO 212 

Max Pressure (psi): 1160 

Max Speed (ft/sec): 1.5 

Mating Surface Roughness - Ra (µm) - DYNAMIC: 0.1<>0.4 

Mating Surface Roughness - Ra (µm) - STATIC: 0.8 MAX 

Part Number Definition (Metric): MUA-(ROD DIAMETER)X(OD)X(HT)R 

Additional Part Number Definition (Metric): 22 X 29 X 5 = MUA-22X29X5R