POLYPACK DEEP INCH

DESCRIPTION

The Hallite T512 deep profile, straight-lip, loaded polypack is a U-cup utilizing a polyurethane shell energized by a highly resilient O-ring. At zero or low pressure the O-ring helps to increase the sealing force preventing any bypass. As the system pressure rises the sealing force increases and the O-ring ensures complete lip actuation under most conditions. 

This seal provides extra stability needed to resist rolling in the groove. This extra stability together with the knife-trimmed precision sealing lips provides improved life and sealing. This seal can be utilized in either single-acting piston applications or, when installed back to back in separate grooves, can be used in double-acting piston applications. 

SEAL INFORMATION

Material Type (Primary Seal): POLYURETHANE 

Material Type (Energizer): 70A NITRILE 

Durometer (Shore A): 93 

Temperature Range (F): -40 TO 230 

Extrusion Gap at Various Pressures (in):

• 2,400 PSI: 0.024
• 3,750 PSI: 0.020
• 5,000 PSI: 0.016

Max Speed (ft/sec): 1.5 

Mating Surface Roughness - Ra (µin) - DYNAMIC: 4<>16 

Mating Surface Roughness - Ra (µin) - STATIC: 63 MAX 

Part Number Definition (Inch): UH-(CS)(ID)(HT) 

Additional Part Number Definition (Inch): 2 X 2-1/2 X 3/8 = UH-25002000375