DESCRIPTION
DU self-lubricating bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions.
DU bushings are suitable for lubricated applications. Suitable for linear, oscillating and rotating movements.
Constructed of a Steel back, porous Bronze liner, and PTFE/lead overlay.
SEAL INFORMATION
Material Type (Back): STEEL
Material Type (Liner): BRONZE
Material Type (Overlay): PTFE/LEAD
Temperature Range (F): -325 TO 536
Max Speed (ft/sec) DRY: 8.0
Max Speed (ft/sec) LUBRICATED: 16.0
Mating Surface Roughness - Ra (µin) - DRY: 12<>20
Mating Surface Roughness - Ra (µin) - LUBRICATED: 2<>16
Part Number Definition (Inch): DU-(ID X 16)-(HT X 16)
Additional Part Number Definition (Inch): 1"ID X 1" HEIGHT (.062"THICK) = DU-16-16
NOTE: BUSHING THICKNESS DEPENDS ON DIAMETER. PLEASE VERIFY DIMENSION REQUIREMENTS BEFORE ORDERING OR CONSULT AN H&D REPRESENTATIVE IF YOU HAVE QUESTIONS.